Industrial Camera Enclosure CH50 PMMA - IP69

Overview

This is a version with a PMMA plastic front. Suitable for food operations where there must be no glass and also for lenses with a large angle of view. The visor is identical with the inner diameter = 50mm.

The rugged industrial camera housing provides increased protection of the industrial camera (27x27, 29x29, 30x30, 31x31, 40x30mm) not only from mechanical damage. Another level of industrial camera enclosure protection is against dirt and grease. Special designs and seals provide IP69 resistance.

The Argutec enclosure is quick and simple. Even when replacing the lens or camera, there is no need to remove the housing at the installation site. Watch the video:

When used in industry, the enclosure protects the industrial camera and lens from damage. It can be caused not only by the mechanical part of the line, but also by high temperature, dust or water.

Another level of protection is against dirt and grease. Special designs and seals provide IP69 resistance to pressurized water.

IP69 (IP69K)

Our Enclosure CH50 has been certified to IP66 from the beginning, ie especially for industrial environments where pressurized water is present.
Due to the increasing demand for installation in food operations, the CH50 enclosure has now passed IP69 certification without any design changes.
The test for IP69 certification according to EN 60529 is the same as the test for IP69K certification according to ISO 20653.

Passive cooling as secondary camera protection

The camera temperature is significantly reduced only by passive cooling of the CH50 enclosure. It can be seen from the temperature profile that the CH50 enclosure maintains a lower camera temperature. There is a significant effect on the lens, when without the use of an enclosure, practically all the heat of the camera is transferred to the lens, but when heat is removed by the enclosure, the lens still remains a bit cooler.

Price is for 1 pc (€ 230,69 VAT excl.). For ordering 10+ pcs or regularly using enclosures for your projects contact us for an individual offer: sales@argutec.eu.

Enclosure size and camera mount

When ordering, please consider ordering an atypical enclosure length. The new standard length is 150 mm, where the front part is 50 mm and the rear part is 100 mm. Depending on the size of the camera you are using, there may not be enough space in the enclosure for the connector, and the lens used may also require more space. We will deliver the atypical length enclosure to you within a week and usually with a surcharge of 10%. The picture shows a comparison of a hosing of an atypical length of 180 mm (80 + 100) compared to a standard length.

The camera is mounted to the internal mounting part with 2 screws (standard M2, optional M3). These screws are only used to center the camera and lock it. As standard, the mount is ready for M2 x 18 mm and a list of cameras is given below. For other cameras, please specify in the order the type of camera to prepare the correct pitch 2xM3. The fixed mounting of the camera inside is secured against movement even in the event of high vibrations by means of pressure using a special pressure part, which is also part of the delivery.

Standard camera mount:

Optional camera mount:

* please specify the exact type of camera in the order.