Atypical products

When ordering, we always ask for the specific type of camera and lens in your application. We can prepare the right length of housing for you. For a shorter and wider lens, it is better to shorten the front part so that the image is not cropped by the front cap. Some narrow lenses, are so long that you would have to push the camera too far into the back of the housing.

For larger frame orders, you can also have a different color of caps. The color swatch is limited for anodizing.

Additional grooves for a 29 x 44 mm camera.

If you need to fit another camera and lens into our housing, we can additionally send you a profile extension with a seal and longer front screws.

The standard is a nickel-brass M25 cable gland with an insert for 2 cables up to 6 mm. The cable itself is sometimes thicker, or you need to connect 3 cables to your camera. Then we have an insert for 3 cables up to 7mm. In addition, it is possible to supply a stainless steel cable gland or 90° corner cable gland made of polymer.

We will prepare the holes for the mounting plate according to your needs.

We can supply covers together with glass defrosting.

Standard mounting plates are intended for cameras with a height of 28-30 mm. If you have a lower camera, we will add an additional flat profile under the camera. Or, on the contrary, we can mill the bottom and top mounting plates for up to 32 mm.

We will be happy to prepare an enclosure with your logo. It is UV printing and logo printing is possible for orders +20 pieces.